Best value for money from this Smoke Leak Detector, diagnosing cars suffering from unstable idling, poor drivability, bad fuel economy, and finding out exactly the location where is leaking smoke from a car in a few minutes only.
APPLICATIONS
|
|
|
Vacuum Leaks: hoses, gaskets, valves, diaphragms, choke pull-offs, heated air intake control and diaphragm systems, EGR hoses, and controls.
Exhaust Leaks: manifold cracks, EGR valve feed tubes and passages, exhaust pipes, catalytic converter, muffler, heat control valves, and crossover passages.
Plus: Injector system leaks, evaporator control system leaks, oil leaks, under dash vacuum leaks, brake booster system leaks, head gasket leaks, cylinder leakage, air and water leaks, turbo/super charger system leaks and component replacements test prior to installation.
|
|
|
|
|
|
|
|
FEATURES
|
 |
Variable Pressure Control
A great new feature - excessive or insufficient smoke pressure may result in incorrect diagnosis or even result in damage to a system.
The Hanatech Leak Detector variable pressure control allows you the freedom to adjust the pressure level at the turn of a knob.
Adjust the pressure to suit the application and the high quality gauge will lead you in the right direction to quickly find the leak.
Remember, low pressure smoke cannot always find the leak!
|
|
|
|
|
|
|
|
|
|
 |
Check Valve Quick Release
The check valve is a pressure regulating device that releases smoke when the pressure exceeds a preset amount.
Most conventional smoke testers use non-toxic smoke liquids and its smoke turns into sticky liquid form and accumulates inside the valve when the machine cools down after operation. This may result in malfunction of the valve or may even block the valve.
Safety and performance is our goal and the Check Valve Quick Release is a performance enhancing feature that guarantees every test remains the same at all temperatures.
Simply lift the pressure regulator knob and release and test results are the same hot or cold.
|
|
|
|
|
|
|
|
|
High-Tech Electronic Control
Utilising Hanatech's electronic diagnostic experience, Leak Detector offers you the latest in CPU design, less moving parts and increased durability.
Soft touch membrane keypad, electronically controlled three stage heating circuit and accurate heating controls offer you reliability, quality and strength that other brands can't.
Hanatech Leak Detector ensures your safety and peace of mind.
The automatic electronic power controls ensure that unintended power-on is never an issue and the automatic smart control simply powers down when not in use.
|
|
|
|
|
|
|
|
|
Double Action Solenoid
It must be frustrating if the smoke flows back into the machine while you are searching for a leak after stopping the compressor.
Hanatech Leak Detector has two solenoids in the smoke delivery system and these devices block any reverse flow of smoke into the machine when the compressor is not running.
You can even check if there is an invisible tiny pin-hole leak by observing the dropping of the pressure gauge needle.
|
|
|
|
|
|
Parts and Components
|
|
Specifications
|
|
|
|
|
|
|
Dimensions : 460 - 300 - 200
Net Weight : 12.5Kg
Shipping Weight : 15Kg
Supply Volume 13 Litres/min
Power Supply : 12 Volt DC
Power Consumption : 3.5 Amps
|
|
|
Smoke Delivery Hose : 4 Metres
Remote Control Cable : 4 Metres
Power Supply Cable : 4 metres
Supply Pressure (adjustable) : 0.1 ~ 1.5Kg/cm²
Operating Temperature : 0°C ~ 40°C
Nozzle Adaptors - supplied kit assortment
|
|
Cart is empty
